Care and Maintenance

 

Periodic maintenance is necessary to ensure long term durability and customer satisfaction. All products should be closely inspected each month. If any item shows signs of structural failure, it should be taken out of service immediately.

 

Fabric

Please follow specific manufacturing guidelines when cleaning fabric. Cleaning with an unapproved solution could damage the fabric.

 

Neglect is the most common cause of the premature breakdown of any upholstery fabrics. Problems occur as a result of inadequate removal of dirt, dust and grit which settles on the surface of the upholstery. If not removed, the dirt and grit will eventually penetrate the structure of the fabric. With further agitation, as a user sits on the upholstery, the dirt and grit will act like sandpaper wearing away and breaking fibers in the fabric structure. If enough fibers are broken, a hole will eventually form in the upholstery.

 

In the same way, pilling can occur. Pilling involves loose fibers migrating to the surface of the fabric, which with further agitation as a user sits on the chair, will curl up to form tiny bobbles of fiber. Although pilling can occur with well-maintained fabrics, it is well known that soiling agents can initiate and/or significantly accelerate pilling.

 

Leather

Please refer to manufacturer guidelines for conditioning and cleaning. Regular maintenance may be necessary every 3 months to keep the leather surfaces from peeling or cracking.

 

Plastic/felt feet

Need to be inspected and replaced if worn

 

Epoxy powder frames

Clean using a damp cloth with a mild solution of soap and water.

 

Chrome frames

Clean chrome with a good grade chrome cleaner to maintain a bright finish. Occasionally chrome leakage can occur on products that have been just delivered. Wipe down with a chrome cleaner to eliminate this.

 

Table tops

Clean with a soft damp cloth and mild detergent solution. Do not use abrasive cleaners.

 

Wood seating & tables

Wood is a natural product and owes its inherent beauty to the variations in color, texture, and grain which are not considered defects. SIC cannot guarantee the exact matching of colors between batches of wooden products, as wood naturally ages through time.

 

TFL & Laminates

TFL & Laminate tops are very resistant to normal office problems, such as tea or coffee stains. Simply wiping with a soft damp cloth will remove most stains. Should a stubborn problem arise, clean with a soft damp cloth and a mild detergent solution. Do not use abrasive cleaners. Cut back edges should be wiped with a dry cloth only.